Before starting the machine should be a careful inspection of all parts of the belt, pay attention to whether there are people and other sundries. Only signal to start when there is no problem after check. When several belts are connected in series, the starting sequence is from discharging end to feeding end. Belt conveyor roller in the start, first idling a cycle, after the inspection of the normal parts, before loading operation.

After the belt conveyor roller running, operators must pay attention to concentrate on their posts, belt drivers should pay attention to patrol along the line, find problems, timely elimination; In the process of operation, if the belt is found to run off, slip, jump and other abnormal phenomenon, should be timely adjustment, belt slip, is strictly prohibited to drum and belt between the stuff. Belt tightness is not appropriate, timely adjustment of tension device.

When running, pay attention to check whether the motor, gearbox, transmission gear, bearing bearing bush, coupling, transmission belt, roller, idler is normal; Sweeper and brake device is not effective, especially the up and down belt brake device must be absolutely reliable, prevent flying.

Each part of the conveyor roller must pay attention to connect firmly, can not appear crack, deformation or other abnormal sound; The grounding protection and insulation of this electrical equipment should be checked frequently. The motor should be measured and checked regularly with meters and maintained regularly. Belt transport equipment in operation, no one across the belt to walk, do not take the belt.

Belt conveyor roller in the use of time also pay attention to often clean the dirt on the belt roller. Do not use triangle pick, shovel and stick to clean without stopping. Feeding on the belt must be uniform, to prevent overfeeding, crushing the belt, affecting the safe operation of machinery; It is strictly forbidden to stop heavy vehicles during operation (except emergency); In case of sudden power failure, the power supply of the equipment should be cut off immediately.